Battery Charge - Panasonic TG2550 - 2.4 Gigarange Cordless Phone Operating Instructions Manual

Battery Charge

Place the handset on the base unit
and charge for about 7 hours before
initial use.
• The IN USE/CHARGE indicator
lights.
Battery strength
You can check the battery strength on the display while the handset is on
the base unit, while it is in use (making/answering a call etc.), or after
viewing the Caller List or directory items, programming etc.
The battery strength will remain for 5 seconds after using the handset, then
the display will return to the stand-by mode (see next page).
The battery strength is shown as in the chart below.
Display prompt
Recharge
Recharge the battery when:
— "Recharge" is displayed,
— " " flashes on the display, or
— the handset beeps intermittently while it is in
use.
• If you DO NOT recharge the handset battery for more than 15 minutes,
the display will keep indicating "Recharge" and/or "
to flash.
(flashing)
IN USE/CHARGE
Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Recharge
" will continue
11