Setting The Auto Talk Feature - Panasonic KX-TCD965EC Operating Instructions Manual

KX-TCD965EC-1(2~25) 99.9.27 8:05 PM
Settings

Setting the Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without
pressing . If you want to use this feature, turn the feature ON. The factory preset is OFF.
In order to view Caller ID information before answering a call, leave the Auto Talk feature OFF.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
1
Press F .
Press G G or F F until the arrow points to
2
"Program", then press OKH H .
3 Press G G or F F until the arrow points to
"Setting Handset", then press
OKH H .
Press G G or F F until the arrow points to
4
"Auto Talk", then press OKH H .
The current setting is at the arrow.
Press G G or F F to select ON or OFF.
5
6 Press OKH H .
A confirmation tone sounds.
The display will return to "Auto Talk".
To return to the stand-by mode, press
or wait for 60 seconds.
18
Page 18
You can press to go to the next menu
F
instead of pressing G G .
You can exit the programming mode any time
by pressing .
C
C