Table of Contents
Advertisement
Optional Document Feeder
Place a stack of originals in the op-
tional document feeder. They will be
fed into the machine automatically.
Originals
Placing the following originals in the
document feeder might damage the
originals or cause misfeeds. Use the
exposure glass instead.
• Originals heavier than 127.9 g/m
34 lb
• Originals lighter than 52.3 g/m
• Originals smaller than 148 mm × 210
mm, 5.9" × 8.3"
• Originals larger than 297 mm × 864
mm, 11.7" × 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin and flimsy originals
• Originals with index tabs
• Transparent originals such as OHP
transparencies or translucent pa-
per
2. Optional Functions
This machine can detect the following
original sizes when the original is
placed in the optional document feed-
er.
2
,
❒ Set originals only after the ink or
2
, 14 lb
For standard printing, set originals as
shown below.
You cannot place originals of differ-
ent sizes at the same time.
For thin originals, place them in the
document feeder one at a time, or use
the exposure glass instead.
The first 5mm, 0.2", of the leading
edge and the last 2mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 5mm, 0.2", and the trailing edge
margin is at least 2mm, 0.08".
A3 L, B4 JIS L, A4 KL,
Metric version
B5 JIS KL, A5KL
11" × 17" L, 8
Inch version
" × 11"KL,
1
8
/
2
" × 8
1
5
/
2
Note
correction fluid on them is com-
pletely dry. Not taking this precau-
tion could stain the exposure glass
and cause the stains to be printed.
R
R
" × 14" L,
1
/
2
1
/
"KL
2
GRSETT1E
69
Hide quick links:
Advertisement
Table of Contents
