Standard Printing - Ricoh Priport DX 4545 Operating Instructions Manual

Standard Printing

This section explains the basic proce-
dure for making prints. The proce-
dure differs depending on whether or
not the machine is in Auto Cycle
mode.
With Auto Cycle mode, you can pro-
cess masters and make prints in a sin-
gle operation. The default is On, but
you can change the setting using the
user tools. To do so, see "1 Auto Cycle
ON/OFF" on p.83 "4 Mode Setting".
A
Check that the machine is ready
for printing.
B
If User Code mode has been set to
"On", enter your user code with
the number keys, and then press
the {OK} key.
Reference
See p.65 "Entering a User Code
to Use the Machine".
C
Make sure that previous print set-
tings have been cleared.
Note
❒ To clear previous print settings,
press the {Clear Modes/Energy
Saver} key.
D
Lift the exposure glass cover.
Reference
For details on how to place orig-
inals in the optional document
feeder, see p.70 "Placing Origi-
nals in the Document Feeder".
E
Place the original face down on
the exposure glass. The original
should be aligned with the refer-
ence mark and the left corner
scale.
A Left corner scale
B
Reference mark
Standard Printing
1
ZFRH060E
ACY058S
17