Saving Energy - Ricoh Priport DX 4545 Operating Instructions Manual

Operation

Saving Energy

If not used for a certain period of time
after printing, the machine will enter
1
the Energy Saver or Auto Off mode to
reduce energy consumption.
❖ Energy Saver mode
The display goes off. Printing from
a computer is possible in this mode.
To operate the machine, press the
Operation switch, or place origi-
nals on the exposure glass or in the
ADF.
To go back into the Energy Saver
mode, press the Operation switch.
❖ Auto Off mode
The machine turns off automatical-
ly. To use it, turn the main switch
on.
Note
❒ You can select which mode the ma-
chine enters after a specified peri-
o d h a s p a s s e d f o l l o w i n g j o b
completion. See "8 E. Saver Op-
tion" on p.80 "1 System".
❒ You can change the time the ma-
chine waits before Energy Saver or
Auto Off mode starts. See "9 E.
Saver Timer" on p.80 "1 System".
20
Note
❒ The machine will not automatical-
ly enter the Energy Saver or Auto
Off mode in the following cases if:
• a warning message appears
• there is no ink
• originals or paper are jammed
• it is making master or printing
• the machine is printing the sec-
ond page of a combine repeat.
• there is no paper
• the master eject box is full
• there is no master
• originals are left in the ADF
• a cover is open
• you are making changes with
User Tools
• the user code entry screen is dis-
played
• the Data In indicator is lit or
blinking
• you are setting the mode on the
control panel