Ricoh Priport DX 4545 Operating Instructions Manual page 100

User Tools
No. Mode
9 No. of Skip Feed
10 Idlng for Q.Mode You can specify the number of times that the drum unit idles
3
11 Setting Q.Mode
12 No. of Q.start
13 Memory Mode
14 Auto Class
15 Auto Rotation
84
Description
You can specify the number of times that the drum rotates when
in Skip Feed mode. You can also choose whether or not to change
the number of drum rotations temporarily when you press the
{Skip Feed} key. See p.61 "Skip Feed Printing".
Note
❒ Default:
• Number of Skip Feed: 2
when in Quality Start mode.
Note
❒ Default: 2
You can select "Yes" to have the machine automatically carry out
a few idle spins when the power is turned on. If Auto Quality
Start mode is set to "No", you can restore the density by making
a few extra prints or by using the Manual Quality Start mode.
Note
❒ Default: Yes
You can specify the number of times that the drum idles when in
Auto Quality Start mode.
To increase the print image density, increase the number of drum
rotations.
Note
❒ Default: See p.88 "4-12 No. of Q.start"
Reference
To change the number of idle spins, see p.88 "4-12 No. of
Q.start".
You can choose to have either Memory mode or Stack Memory
mode as the default.
Note
❒ Default: Normal (Memory mode)
Under the Class mode, the machine stops after it is finished a
Class print job. When you select Auto Class, the machine stops
for 2 seconds and then goes on to the next Class print job.
Note
❒ Default: Stop
When the orientation in which your original is placed differs
from that of the paper, the machine automatically rotates the
original image by 90° to match the paper orientation.
Note
❒ Default: On