Mode Setting - Ricoh Priport DX 4545 Operating Instructions Manual

4 Mode Setting

No. Mode
1 Auto Cycle
ON/OFF
2 Ignore Paper Size If you are making prints on paper of custom sizes, you can set pa-
3 No Orig.
Size(ADF)
4 No Orig. Size
5 Background
ON/OFF
6 Longer Paper
7 Combine/Repeat You can choose to have either Combine or Repeat selected by de-
8 Cancel Comb.
Description
You can select to have Auto Cycle mode as either "ON" or "OFF"
when the power is turned on.
Note
❒ Default: ON
per size detection to "Ignore".
Note
❒ Default: Do not Ignore
If you are setting long originals in the optional document feeder
(ADF), you can set original detection to "Ignore".
Note
❒ Default: Do not Ignore
If you are setting long originals on the exposure glass, you can set
original detection to "Ignore".
Note
❒ Default: Do not Ignore
When you make prints in Photo, Letter/Photo, or Tint mode, the
background of the prints might appear dirty. In this case, you can
select "Back. Correction" to improve the clarity of your prints.
Note
❒ Default: W/O back. correction
You can select "Use" to allow the use of paper longer than
432mm, 17.0".
Note
❒ Default: Do not use
fault when the power is turned on.
Note
❒ Default: Use (Combine)
You can specify whether Combine/Repeat mode will be auto-
matically cleared after you have finished your print job.
Note
❒ Default: Do not cancel
User Tools Menu
3
83