Quality Start Mode - Ricoh Priport DX 4545 Operating Instructions Manual

Operation

Quality Start Mode

If the machine is not used for a long
time, or when you change to a color
1
drum that has not been used recently,
the ink on the drum may dry up. This
might affect the print quality. To
solve this problem, you can have the
machine carry out a few idle spins of
the drum before a print run.
Note
❒ You can change the number of
spins. See "10 Idlng for Q.Mode"
p.83 "4 Mode Setting".
❒ The number of spins can be set
from 1 to 5.
❒ The default is 2.
A
Press the {Quality Start} key.
B
Set your original.
C
Press the {Master Making} key.
Printing starts automatically after
the trial print.
66
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
-Auto Quality Start
You can program the machine to au-
tomatically carry out idle spins. This
is called Auto Quality Start.
Note
❒ To use this function, you need to
set Auto Quality Start to "On" us-
ing the user tools. See "11 Setting
Q.Mode" on p.83 "4 Mode Set-
ting".
❒ To specify the number of idle spins
according to the length of time for
which the machine is not used, see
p.88 "4-12 No. of Q.start".
BQZ025S
AQN024S