Operation
F
Lower the exposure glass cover.
1
G
Specify the print settings.
H
Enter the number of prints with
the number keys.
Note
❒ If you have made a wrong en-
try, press the {Clear/Stop} key
and then enter the number
again.
18
When Auto Cycle mode is on
A Check that Auto Cycle mode is
on.
ZFRH061E
B Press the {Master Making} key.
AQN023S
Printing starts automatically af-
ter the trial print.
When Auto Cycle mode is off
A Check that Auto Cycle mode
has been disabled.
AQN030S
AQN024S
AQN030S