Recalling A Program - Ricoh Priport DX 4545 Operating Instructions Manual

Recalling a Program

A
Press the {Program} key.
B
Use the {~}{}} keys to select Re-
call, and then press the {OK} key.
C
Use the {~}{}} keys to select the
number to recall, and then press
the {OK} key.
The stored settings are displayed.
D
Confirm that the settings are cor-
rect, and then set your original.
E
Enter the number of prints with
the number keys.
F
Press the {Master Making} key.
Printing starts automatically after
the trial print.
AQN038S
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
p.18 "When Auto Cycle mode is
off".
AQN023S
Program
1
AQN024S
63