Optional Functions; Printing Using The Optional Document Feeder; Originals - Ricoh Priport JP5000 Operating Instructions Manual

2. OPTIONAL FUNCTIONS

Printing Using The Optional Document
Feeder
Insert a stack of originals in the docu-
ment feeder. It will be fed automati-
cally.

Originals

Setting the following originals in the
document feeder might cause origi-
nal misfeeds or damage to the origi-
nals.
Set the following kinds of originals on
the exposure glass (contact glass).
• Originals heavier than 105 g/m
27 lb
• Originals lighter than 52 g/m
lb
• Originals smaller than 105 mm ×
128 mm, 4.2" × 5.1"
• Originals larger than 297 mm × 864
mm, 11.6" × 33.8"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that have low stiff-
ness
• Originals with index tabs
• Translucent paper
The following original sizes set in the
document feeder can be detected.
Metric version A3 L, B4 L, A4 KL,
Inch version
2
,
Under the following conditions, the
machine might not detect the origi-
2
, 14
nal. In this case, select the original im-
age area with the {Edge Erase} key.
See ⇒ P.40 "Edge Erase—Erasing Edge
Margins".
• When you use originals with index
tabs.
• When you use OHP transparencies
or translucent paper.
• When you use dark originals.
• When you use originals with solid
images.
• When you use originals other than
the sizes described above.
Note
Set originals after correction fluid
and ink have completely dried.
Not taking this precaution could
mark the exposure glass (contact
glass) and cause marks to be print-
ed.
B5 KL, A5KL
11" × 17" L, 8 " × 14"
1
/
2
" × 11"KL,
L, 8
1
/
2
" × 5
1 1
8 / / "KL
2 2
81