Quick Install - Ricoh Priport HQ7000 Printer Reference

Preparing to Print
The following table shows the printer drivers and software that can be installed
using Auto Run:
2
RPCS Printer Driver
PostScript 3 Printer
Driver
SmartDeviceMonitor
for Admin
SmartDeviceMonitor
for Client
*1
Available operating systems are: Windows 95/98/Me/2000/XP, Windows Server
2003, and Windows NT 4.0. Auto Run is unavailable with Macintosh.

Quick Install

Auto Run will start the installer automatically when you insert the CD-ROM
into the CD-ROM drive. By selecting Quick Install, you can easily install the
RPCS printer driver. SmartDeviceMonitor for Client can also be installed pro-
vided the printer and computer are connected via the network.
Preparation
Before starting installation, close all documents and applications.
Limitation
❒ The following conditions are required:
• Windows 95/98/Me/2000/XP, Windows Server 2003, or Windows NT 4.0
For network connections:
• The printer must be connected to the network using an Ethernet cable.
• TCP/IP protocol must be configured.
• The IP address must be assigned to both printer and computer.
• The IEEE 802.11b interface unit is installed and the connection is properly
made.
For parallel connections:
• The printer must be connected to the computer using a parallel cable.
• Bidirectional transmission must be enabled.
26
Quick Install
Network connection
with TCP/IP
❍
❍
*1
Auto Run
Parallel connection
❍
Add Printer and
Utility Wizard
❍
❍
❍
❍