Installing The Postscript 3 Printer Driver - Ricoh Priport HQ7000 Printer Reference

Preparing to Print
E
Select the options installed in the [Select printer options:] list.
F
Click [OK].
G
Click [OK], and then close the [Printer Properties] dialog box.

Installing the PostScript 3 Printer Driver

2
This section gives basic instructions for installing the PostScript 3 printer driver.
Actual procedures may differ depending on the operating system. Follow the
procedures below, as appropriate.
Reference
To use the PostScript 3 printer driver, the PostScript board must be installed
on the printer. See PostScript3 for details.
Windows 95/98/Me - Installing the PostScript 3 printer driver
A
Quit all applications running.
B
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
C
Select a language for the interface, and then click [OK].
The following languages are available: Deutsch (German), English (English),
Espanol (Spanish), Francais (French), Italiano (Italian), Nederlands (Dutch),
Russian (Russian)
The default interface language is English.
Note
❒ The printer driver with the selected language will be installed.
❒ When Russian is selected, an English version is installed.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Local Printer], and then click [Next].
A dialog box for selecting the printer appears.
G
Select the model of the printer you are using, and then click [Next].
H
In the [Available ports:] box, click [Printer Port], and then click [Next].
34