Confirming the Connection
A
Make sure the LED of the IEEE 802.11b card is lit.
❖ When using in infrastructure mode
1.
If [LAN Type] on the [Interface Set-
tings]/[Network] screen is not set to
[IEEE 802.11b], this LED does not
light, even if the main power is on.
❖ When using in ad hoc mode/802.11 ad hoc mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange.
B
Print the configuration page to verify settings.
Reference
For more information about printing a configuration page, see p.87 "Print-
ing the configuration page".
1
2
ZGDH600J
2.
If the printer is connected proper-
ly to the network, the LED is green
when in infrastructure mode. If the
LED is blinking, the printer is
searching for devices.
1
2
ZGDH600J
2.
If the printer is connected proper-
ly to the network, the LED is green
when in ad hoc mode or 802.11 ad
hoc mode. If the LED is blinking, the
printer is searching for devices. The
LED will light after a few seconds.
Connecting the Machine
2
15