Other Printing Problems - Ricoh Priport HQ7000 Printer Reference

Troubleshooting

Other Printing Problems

Multiple pages are fed through
the printer at once.
The image is printed on the re-
verse side of the paper.
Paper misfeeds occur frequently.
The display panel error message
stays on after removing the mis-
fed paper.
A print instruction was issued
from the computer, but printing
did not start.
5
Photo images are coarse.
Images are cut off, or excess is
printed.
Page layout is not as expected.
76
Status
Remove all paper from the paper feed tray and fan it gently
to get air between the sheets. After that, load it back into the
paper feed tray.
Load the paper the other way up.
Use the recommended paper. Avoid using curled, folded,
wrinkled, perforated or glossy paper.
Open the front cover of the printer and then close it.
User code management may have been set. Ask the adminis-
trator about valid user codes. To print, the user code must be
entered from the printer driver.
Some applications reduce print resolution.
You may be using paper smaller than the size selected in the
application. Use the same size paper as that selected in the
application. If you cannot load paper of the correct size, use
the reduction function to reduce the image, and then print.
See the printer driver Help.
Print areas differ depending on printer used. Information
that fits on a single page on one printer may not fit on a single
page of another printer.
Adjust the [Printable area:] setting on the [Printer Configura-
tion...] tab in the RPCS printer driver.
See the printer driver Help.
Possible Causes, Descriptions, and Solutions