Requirements; Using The Parallel Cable - Ricoh Priport HQ7000 Printer Reference

Requirements

Before using this printer, make sure all environmental and electrical require-
ments are met. Connect the printer to the host computer using the parallel port,
network interface unit, or both.
Make sure all cables, connectors, and electrical outlets necessary to attach the
printer to the host computer or network are at hand.
Important
❒ The interface cable is not supplied. It is your responsibility to prepare the in-
terface cable appropriate for the computer that you are using.

Using the Parallel Cable

Connect the printer to the host computer using a parallel cable compliant with
IEEE 1284 (available separately).
Follow these steps to connect the printer to the host computer.
Important
❒ Before connecting an interface cable between the printer and a computer,
make sure that the printer is not operating, and then turn off the main power
switches of the printer and the computer.
A
Attach the parallel cable to the parallel interface connector of the printer,
and then secure the cable.
B
Attach the other end of the parallel cable to the port of the computer. Secure
the cable.
ACV014S
Connecting the Machine
2
13