Preparing To Print - Ricoh Priport HQ7000 Printer Reference

This section gives instructions for connecting the printer and computer, config-
uring the printer, and installing software.
❖ When operating the printer with a USB or a parallel connection
• Connect the printer and computer using a USB or a parallel connection.
Reference
For more information about connection using the USB, see Preparations
for Use as a Printer.
For more information about connection using the parallel cable, see p.12
"Connecting the Machine".
• Install a printer driver from the CD-ROM labeled "Printer Drivers and Util-
ities".
Reference
For more information, see p.25 "Installing the Software".
❖ When operating the printer under a network environment
• Configure the network using the machine's control panel.
Reference
For more information, see p.17 "User Tools Menu (System Settings)".
For information about connection using Ethernet, see Preparations for
Use as a Printer.
For information about connection using wireless LAN, see p.12 "Con-
necting the Machine".
• Install a printer driver and other utilities from the CD-ROM labeled "Print-
er Drivers and Utilities".
Reference
For more information, see p.25 "Installing the Software".
Note
❒ "Network environment" describes a situation where the printer is connected
to a computer via wireless LAN.
❒ The IEEE 1284 parallel board for parallel connection and the IEEE 802.11b in-
terface unit for wireless LAN connection cannot be used at the same time.
❒ Wireless LAN and parallel connection are optional functions.

2. Preparing to Print

11