Host Interface; Ps Menu; Administrator Tools - Ricoh Priport HQ7000 Printer Reference

Host Interface

❖ I/O Buffer
Sets the capacity of the reception buffer.
Note
❒ Default: 128 KB
❖ I/O Timeout
Sets the time to enable the interface after data stops being received. When the
time set here is exceeded, the printer will not receive further data via the in-
terface.
Important
❒ If the set time is too short, a time out might occur while one data is being
received. As a result, data from another interface might cut in and be print-
ed, or the emulation retrieval might start to replace the emulation before
the data is completely received.
Note
❒ Default: 15 seconds

PS Menu

❖ Data Format
You can specify the data format for PostScript print jobs.
Note
❒ Default: Binary Data
❒ Under Mac OS X, select "TBCP" when you print with a USB connection.
❖ RAM Disk
You can select the RAM disk capacity for PostScript.
Note
❒ Default: 4 MB

Administrator Tools

❖ Return to Defaults
You can reset the settings back to their defaults. However, the "IP Address",
"Network", and the "Ethernet Speed" settings remain in effect.
Online Print Features Settings
6
89