Labconco Spectrum 177050100 User Manual page 17

4: Installation
With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:
• Unpack and move the equipment
• Install the equipment
• Adjust outlet orientation
• Connect to blower inlet
• Connect a blower outlet (such as zero pressure weather cap)
• Connect electrical service
• Connect PVC drain (for PVC Blowers only)
Unpacking
The following tools are required to unpack the equipment:
• Box Knife
The following safety precautions must be followed by all personnel unpacking the
equipment.
• Wear safety glasses
• Wear gloves
• No loose fitting clothes
• Wear close-toed shoes
• Follow safe-lifting practices
17