2018- 2022 jeep wrangler jl / gladiator jt 6.5 speaker pods with tweeter adapters (24 pages)
Summary of Contents for Stinger AudioControl TXRM02D10
Page 1
NOTE! Read this installation guide thoroughly before disassembling or modifying the vehicle. Installation of this product requires technical skill, experience and specialized tools. If in doubt, it’s recommended to have it professionally installed by an authorized Stinger or AudioControl Dealer.
INSTALLATION NOTES INSTALLATION The TXRM02D10 is designed to mount under the rear seat of specific Ram Trucks that are NOT equipped with a power rear seat.. Step 1 Some installation steps are more easily completed with a second person. Lift up the rear seat to expose the under ...
Page 3
INSTALLATION INSTALLATION Step 3 Place the speaker enclosure in Step 2A (if equipped) the vehicle with the rear of the enclosure facing the back seat. If vehicle is equipped with a factory subwoofer under the passenger side rear Verify that the enclosure is centered. seat, remove the two 18mm factory rear The enclosure can be slid left or seat bolts that secure the factory subwoofer...
Limited Warranty Stinger warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. Repeat steps 4-6 for opposite side of the This warranty is not transferable and applies only to the original purchaser from an authorized Stinger dealer in the United States of America only.
Need help?
Do you have a question about the AudioControl TXRM02D10 and is the answer not in the manual?
Questions and answers