Advertisement
Quick Links
®
iBoard
by APS
READ INSTRUCTIONS CAREFULLY BEFORE START ING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS
RECOMMENDED.
*ROCKER PANEL MOUNT
*NO DRILLING REQUIRED
Item
QTY
1#
6
Mounting Brackets
2#
12
M8X1.25-30mm Hex Bolts
3#
12
M8 Large Flat Washers
4#
12
M8 Lock Washers
2 #
iBoard
Description
3 #
4 #
Customer Support: info@iboardauto.com
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
Item
QTY
M6X1-20mm Square Head Bolts
5#
12
6#
12
M6 Large Flat Washers
7#
12
M6 Nylon Lock Nuts
5 #
1
®
PART#: IB-R295
Required
6-7
16-18
31-32
56-58
92-94
Description
7 #
6 #
Rev. 20211001
√
√
X
X
X
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for APS iBoard IB-R295
Summary of Contents for APS iBoard IB-R295
- Page 1 ® iBoard ® iBoard by APS PART#: IB-R295 Fastener Size Tightening Torque (ft-lbs) Required READ INSTRUCTIONS CAREFULLY BEFORE START ING INSTALLATION. REMOVE CONTENTS FROM BOX AND √ VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 16-18 √ RECOMMENDED. 10mm 31-32 12mm...
- Page 2 ® iBoard Front Driver Passenger Customer Support: info@iboardauto.com Rev. 20211001...
- Page 3 ® iBoard STEP 1 STEP 2 Select (1) Mounting Bracket, attach the Bracket to the factory Start installation from the driver side front of the vehicle, (Fig threaded holes using the included (2) M8x1.25-30mm Hex 1). Locate the 6 plugs along the bottom edge of the body, Bolts, (2) M8 Lock Washers and (2) M8 Large Flat Washers, Mounting Brackets will be bolted to the 1st, 2nd and 4th thread- (Fig 3).
- Page 4 ® iBoard M6X1-20mm Square Head Bolts Front (Fig 6) Slip M6X1-20mm Square Head Bolts Into (Fig 5) Driver Rear Side Mounting Location The Bottom Channels STEP 4 (2) M6X1-20mm Square Head Bolts (2) M6 Large Flat Washers (2) M6 Nylon Lock Nuts Select a Running Board.
Need help?
Do you have a question about the iBoard IB-R295 and is the answer not in the manual?
Questions and answers