Advertisement
Quick Links
IARMOR EDGE™
BEFORE INSTALLATION
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE
PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. ASSISTANCE IS RECOMMEND-
ED. THANK YOU FOR CHOOSING OUR PRODUCT!
*ROCKER PANEL MOUNT
*DRILLING/TRIMMING NOT REQUIRED
Driver
iArmor
Front
1#
2#
1#
Customer Support: info@iarmorauto.com
®
Torque Value
Fastener Size
Tightening Torque (ft-lbs)
6mm
8mm
10mm
12mm
14mm
2#
1
PART#: IA-W295
Required
6-7
16-18
31-32
56-58
92-94
Passenger
1#
2#
Rev. 20220601
X
√
√
X
X
Advertisement
Related Manuals for iArmor EDGE IA-W295
Summary of Contents for iArmor EDGE IA-W295
- Page 1 ® IARMOR EDGE™ PART#: IA-W295 Torque Value BEFORE INSTALLATION Fastener Size Tightening Torque (ft-lbs) Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMEND- 16-18 √ ED. THANK YOU FOR CHOOSING OUR PRODUCT!
- Page 2 ® Hardware Package (For Brackets & Step Bars Installation) Item Description Item Description Driver Front & Rear / Passenger Center Mounting Brackets M8 Lock Washers Passenger Front & Rear / Driver Center Mounting Brackets M10X1.5-25 Hex Bolts M8X1.25-30 Hex Bolts...
- Page 3 ® The instruction here is for your reference only. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. STEP 1 Start the installation on the driver side of the vehicle. Locate the 6 plugs along the bottom of the body panel.
- Page 4 ® (2) M8X1.25-30 Hex Bolts (2) M8 Lock Washers (2) M8 Large Flat Washers (2) M8X1.25-30mm Hex Bolts (2) M8 Lock Washers Front (2) M8 Large Flat Washers Front (Fig 5) Driver Front Mounting Bracket Installation (Fig 6) Driver Front Mounting Bracket Installed...
Need help?
Do you have a question about the EDGE IA-W295 and is the answer not in the manual?
Questions and answers