Related Manuals for ZKTeco SpeedPalm-V5L
Summary of Contents for ZKTeco SpeedPalm-V5L
- Page 1 Quick Start Guide SpeedPalm-V5L Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
- Page 2 Overview Microphone 24.50mm 92.30mm Camera (Visible Light Face) Near-infrared Flash 5-inch Touchscreen Reboot Button Near-infrared Flash Visual Indicator Speaker Biometric Module (Palm) Card Reading Area Auxiliary Input Power In RXD2 Sensor TXD2 RS232 Ethernet Exit Button +12V IWD0 Lock RS232 Wiegand IWD1 485A...
- Page 3 Installation Environment Please refer to the following recommendations for installation. INSTALL INDOORS KEEP EFFECTIVE AVOID INSTALLATION AVOID DIRECT AVOID USE OF ANY ONLY DISTANCE OF NEAR SUNLIGHT HEAT SOURCE 0.3 to 2m GLASS WINDOWS AND EXPOSURE NEAR THE DEVICE Recommended Palm Gestures Note: 1.
- Page 4 Door Sensor Exit Button Indoor Station Card Lock Reader TCP/IP SpeedPalm-V5L Power Connection AC Adapter DC 12 3A Recommended power supply 12V ± 10%, at least 3,000mA. To share the power with other devices, use a power supply with higher current...
- Page 5 Ethernet Connection Connect the device and computer software over an Ethernet cable. As shown in the example below: Default IP address: 192.168.1.201 Subnet mask: 255.255.255.0 IP address: 192.168.1.130 Subnet mask: 255.255.255.0 Click on [COMM.] > [Ethernet] > [IP Address] , input the IP address and click on [OK]. Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the ZKBio CVAccess/ZKBio Time /ZKBio CVSecurity software.
- Page 6 RS485 and RS232 Connection The RS485 and the RS232 lets user connect to multiple readers to the device. The RS232 and RS485 can be connected to the terminal, as shown in the figure below. RXD2 TXD2 RS232 Printer RS232 Printer 485+ 485A 485-...
- Page 7 Lock Relay Connection The system supports both Normally Opened Lock and Normally Closed Lock. The NO Lock (normally opened when powered) is connected with 'NO1' and 'COM' terminals, and the NC Lock (normally closed when powered) is connected with 'NC1' and 'COM' terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below: 1)Device not sharing power with the lock 2)Device sharing power with the lock...
- Page 8 User Registration When there is no super administrator set in the device, click on to enter the menu. Add a new user and set User Role to Super Admin, then the system will request for the administrator’s verification before entering the menu. It is recommended to register a super administrator initially for security purposes.
- Page 9 Method 2: Registering on ZKBio Time Software Register on the PC Please set the IP address and cloud service server address on the device. Click [Device] > [Device] > [Add] to add the device to the software. It can automatically be added when the device's server address and port are set. Visitor Meeting System...
- Page 10 Register on the Phone Once the ZKBio Time software is installed, the users could enroll their face template via a browser application on their own mobile phone. Click [Device] > [Data] > [Bio-Photo] > [QR Code] scan the QR code to enroll user’s face template.
- Page 11 Method 3: Register on ZKBio CVAccess Software Register on the PC Please set the IP address and cloud service server address in the Comm. Menu option on the device. Click [Attendance] > [Attendance Device] > [Authorized Device] to search the device on the software.
- Page 12 Register on the Phone Once the ZKBio CVAccess software is installed, the users could enroll their face via a browser application on their own mobile phone. 1. Click [Personnel] > [Parameters], input ‘’http://Server address: Port’’ in the QR Code UGL bar. The software will automatically generate a QR code. Scan the QR code or login onto ‘’http://Server address: Port/app/v1/adreg’’...
- Page 13 Method 4: Register on ZKBio CVSecurity Software Register on the PC Please set the IP address and cloud service server address in the Comm. Menu option on the device. Click [Access] > [Access Device] > [Device] > [Search Device] to search the device on the software.
- Page 14 Register on the Phone 1. Click [Personnel] > [Parameters], input ‘’http://Server address: Port’’ in the QR Code UGL bar. The software will automatically generate a QR code. Scan the QR code or login onto ‘’http://Server address: Port/app/v1/adreg’’ by the mobile phone to register users.
- Page 15 Ethernet and Cloud Server Settings Click on > [ COMM. ] > [ Ethernet ] to set the network parameters. If the TCP/IP communication of the device is successful, the icon will be displayed in the upper right corner of the standby interface. Click on >...
- Page 16 Health Protection...
- Page 17 Call Address: It is the IP Address of the indoor station. Enter the IP Address/Device Number of the Indoor Station Click icon on the standby page to enter the IP address/Device Number of the indoor station in the pop-up interface of the device. Indoor Station SpeedPalm-V5L...
- Page 18 > [Intercom ] > [SIP Settings] > [Contact List]. C lick Add, input device number and call address to add a new contact member. Note: Call address and the SpeedPalm-V5L device must be in the same network segment. Click [SIP Settings] > [Calling Shortcut Settings], select any item except admin, and enter the form information you just uploaded.
- Page 19 Once the SIP is set up correctly, a green dot will appear in the upper right corner of the call page to indicate that the SpeedPalm-V5L device is connected to the server. You can call the account name of the indoor station.
- Page 20 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.
Need help?
Do you have a question about the SpeedPalm-V5L and is the answer not in the manual?
Questions and answers