ZKTeco SpeedPalm-V5L User Manual

Hide thumbs Also See for SpeedPalm-V5L:

Installation manual (6 pages)

Quick start manual (21 pages)

100

101

102

103

104

105

106

107

108

109

110

111

page of 111

/ 111
Bookmarks

Quick Links

Download this manual

Product Name and Model Number

User Manual

SpeedPalm-V5L

Date: July 2024

Doc Version: 1.0

English

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

P a g e

| 1

For further details, please visit our Company's website

www.zkteco.com.

User Manual

Need help?

Do you have a question about the SpeedPalm-V5L and is the answer not in the manual?

Questions and answers

Summary of Contents for ZKTeco SpeedPalm-V5L

Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 Copyright © 2024 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Page 3 ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment.
Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5 The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 6 DELETING USER ......................................40 DISPLAY STYLE ......................................40 USER ROLE ............................42 COMMUNICATION SETTINGS ......................44 NETWORK SETTINGS ....................................44 PC CONNECTION .....................................45 WIRELESS NETWORK ....................................45 CLOUD SERVER SETTING ..................................48 WIEGAND SETUP .....................................48 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 7 SYSTEM INFORMATION ......................... 95 CONNECT TO ZKBIO TIME SOFTWARE..................96 16.1 SET THE COMMUNICATION ADDRESS ............................96 16.2 ADD DEVICE ON THE SOFTWARE ..............................96 16.3 ADD PERSONNEL TO THE SOFTWARE .............................97 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 8 REQUIREMENTS OF LIVE COLLECTION AND REGISTRATION OF VISIBLE LIGHT FACE TEMPLATES ........104 REQUIREMENTS FOR VISIBLE LIGHT DIGITAL FACE TEMPLATE DATA ..................105 APPENDIX 2 ............................. 106 PRIVACY POLICY ....................................... 106 ECO-FRIENDLY OPERATION ..................................109 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 9 Recommended Standing Posture and Facial Expression  Facial Expression Standing Posture Note: Please keep your facial expression and standing posture natural while enrolment or verification. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 10 If the glasses have been changed, authentication may fail. If the face without glasses has  been registered, authenticate the face template without glasses further. If the face with glasses has been registered, authenticate the face with the previously worn glasses. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 11 Place your palm in front of the biometric module, such that the palm is placed parallel to the device. Make sure to keep space between your fingers. Standby Interface After connecting the power supply, the following standby interface is displayed: P a g e | 10 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 12 Note: The punch state options are off by default and need to select other mode options in the "Punch States Options" to get the punch state options on the standby screen. P a g e | 11 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 13  Tap [ABC] to return to the alphabetic keyboard.  Tap the input box, a virtual keyboard appears.  Tap [ESC] to exit the virtual keyboard.  P a g e | 12 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 14 1: 1 Palm Verification Mode  Tap the button on the main screen to enter 1:1 palm verification mode. Input the user ID and tap [OK]. P a g e | 13 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 15 If the user has registered face template, password and card in addition to his/her palm and the verification method is set to Password/Face/Palm/Card verification, the following screen will appear. Select the palm icon to enter palm verification mode. P a g e | 14 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 16 When the user enables the Enable mask detection function, the device will identify whether the user is wearing a mask or not while verification. The following are the popups of the comparison result prompt interface. P a g e | 15 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 18 If the user has registered password, palm and card in addition to his/her face template and the verification method is set to Password/Face/Palm/Card verification, the following screen will appear. Select the face icon to enter face verification mode. P a g e | 17 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 19 The 1: N Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. P a g e | 18 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 20 User ID registered in the device. on the main interface and enter the 1:1 card verification mode. Enter the user ID and tap [OK]. P a g e | 19 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 21 The device compares the entered password with the registered password of the given User ID. Tap the button on the main screen to enter the 1:1 password verification mode. Then, input the user ID and tap [OK]. P a g e | 20 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 22 If the user has registered face template, palm and card in addition to his/her password and the verification method is set to Password/Face/Palm/Card verification, the following screen will appear. Select the password icon to enter password verification mode. P a g e | 21 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 23 Input the password and tap [OK]. Following are the display screen after entering a correct password and a wrong password respectively. Verification is successful: Verification is failed: P a g e | 22 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 24 But as the employee has registered only the face template but not the Password, the verification will  not get completed and the Device displays “Verification Failed”. P a g e | 23 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 26 Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the ZKBio CVAccess/ZKBio Time /ZKBio CVSecurity software. P a g e | 25 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 27 The RS485 and the RS232 lets user connect to multiple readers to the device. The RS232 and RS485 can be connected to the terminal, as shown in the figure below. Door Sensor, Exit Button & Auxiliary Connection  P a g e | 26 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 28 'NC1' and 'COM' terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below: P a g e | 27 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 29 Avoid using the device in acidic or alkaline environments for extended periods.  How to Install the Device on the Wall? Stick the mounting template to the wall and drill holes according to the mounting template. P a g e | 28 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 30 User Manual Insert the expansion tubes into the mounting holes. Attach the backplate on the wall using the wall mounting screws. Attach the terminal to the backplate. P a g e | 29 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 32 Access Control Access Groups, Combine Verification, Anti-passback Setup and Duress Option Settings. To query the specified attendance record, check Attendance Photos and Attendance Search Blocklist attendance photos. P a g e | 31 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 33 Tap User Mgt. to add an administrator or edit user permissions as a super administrator. If the product does not have an administrator setting, the system will show an administrator setting command prompt every time you enter the device menu. P a g e | 32 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 34 User Registration Tap [User Mgt.] on the Main Menu interface. 5.1.1 Register a User ID and Name Tap [New User] and enter the User ID and Name. P a g e | 33 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 35 A progress bar shows up while registering the palm and a “Enrolled Successfully” is displayed as the  progress bar completes. If the palm is registered already then, the “Palm repeated” message shows up. The registration interface is as follows: P a g e | 34 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 36  displayed as the progress bar completes. If the face is registered already then, the "Duplicated Face" message shows up. The registration  interface is as follows: P a g e | 35 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 37 On the Card interface, swiping card underneath the card reading area. The card registration will be  successful. If the card is registered already then the “Duplicate Card” message shows up. The registration interface  is as follows: P a g e | 36 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 38 Note: While registering a face, the system automatically captures a photo as the user photo. If you do not register a user photo, the system automatically sets the photo captured while registration as the default photo. P a g e | 37 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 39 [Apply Group Time Period] > [Time Period 1]. Enter the Time Period number and tap [OK]. 50 time periods can be set in the device and three time periods can be set for each user. For details, see Time Schedule Settings. P a g e | 38 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 40 Note: The process of editing the user information is the same as adding a new user, except that the User ID cannot be modified when editing a user. The process in detail refers to "User Registration". P a g e | 39 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 41 Delete Palm Only: Deletes the palm information of the selected user.  Display Style On the Main Menu, tap [User Mgt.], and then tap [Display Style] to enter Display Style setting interface. P a g e | 40 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 43  menus will be listed on the right. First tap on the required Main Menu function name, and then select its required sub-menus from the  list. P a g e | 42 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 44 But if there is no super administrator registered in the device, then the device will prompt "Please enroll super admin first!" when enabling the User Role function. P a g e | 43 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 45 The factory default value is 255.255.255.0. Please set the value as per the Subnet Mask requirements. The factory default address is 0.0.0.0. Please set the value as per the Gateway requirements. P a g e | 44 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 46 Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can toggle the Wi-Fi to disable button. Tap [Wi-Fi Settings] on the Comm. Settings interface to configure the Wi-Fi settings. P a g e | 45 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 48 The default Gateway address is 0.0.0.0. Can be modified according to the network Gateway availability. The default DNS address is 0.0.0.0. It can be modified according to the network availability. P a g e | 47 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 49 It is used to set the Wiegand input and output parameters. Tap [Wiegand Setup] on the Comm. Settings interface to set the Wiegand input and output parameters. P a g e | 48 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 51 "C" denotes the card number; "E" denotes the even parity bit; "O" denotes the odd parity bit; "F" denotes the facility code; "M" denotes the manufacturer code; "P" denotes the parity bit; and "S" denotes the site code. P a g e | 50 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 53 The factory default address is 0.0.0.0. Please set the value as per the Diagnostic Test requirements. Start the Tap start to automatically diagnose the network. Diagnostic Test P a g e | 52 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 54 The System Settings is used to set the related system parameters to optimize the performance of the device. Tap [System] on the Main Menu interface to get into its menu options. Access Control Terminal: Time Attendance Terminal: P a g e | 53 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 55 Note: For example, the user sets the time of the device (18:35 on March 15, 2020) to 18:30 on January 1, 2021. After restoring the factory settings, the time of the device will change to 18:30, January 1, 2021. Week Mode Date Mode P a g e | 54 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 56 Periodic Del of T&A automatically deletes a set of old attendance photos. Photo Users may disable the function or set a valid value between 1 and 99. P a g e | 55 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 57 Save on failed verification: Photo is taken and saved only for each failed verification. This function is disabled by default. When enabled, a security prompt will Display User Photo pop-up. Alphanumeric User ID Enable/Disable the alphanumeric as User ID. P a g e | 56 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 58 5 seconds. Valid value: 0 to 9 seconds. 0 means continuous identifying, 1 to 9 means identifying at intervals. Face Parameters Tap [Face] on the System interface to go to the face parameter settings. P a g e | 57 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 59 It is convenient to judge whether the near-infrared spectral imaging is fake Binocular Live photo and video. The larger the value, the better the anti-spoofing Detection Threshold performance of near-infrared spectral imaging. P a g e | 58 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 60 In 1:1 Verification Method, only when the similarity between the verifying palm Matching and the user’s registered palm is greater than this value can the verification Threshold succeed. P a g e | 59 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 61 People to Access To enable or disable capturing the unregistered person. Enable Capture of Unregistered When enabled, the device will automatically capture the photo of the unregistered P a g e | 60 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 62 By default, this function is disabled. This function can be enabled or disabled via Standalone the menu interface. When it is switched on, a security prompt appears, and the Communication device will restart after you confirm. P a g e | 61 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 63 Only touching the device screen can wake up the camera for auto-identification. Tap [Tap-To-Unlock] on the System interface to enable this function. P a g e | 62 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 64 If the firmware version of the device is not the latest, the version number and change log of the latest  version will be displayed. Users can choose whether to update to the latest firmware version. P a g e | 63 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 65 During the download process, you can press the back button to go to other menus, and then return to this menu to update after the download is complete. P a g e | 64 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 66 After the update is complete, the device will prompt to restart. After restarting, you can enter the System Information to view the latest firmware version after the update. P a g e | 65 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 67 (this function does not clear registered user data). Tap [Reset] on the System interface and then tap [OK] to restore the default factory settings. P a g e | 66 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 68 When there is no operation, and the time exceeds the set value, the device Menu Timeout(s) automatically goes back to the initial interface. The function can either be disabled or set the required value between 60 and P a g e | 67 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 69 Tap [Bell Schedules] on the Personalize interface to configure the Bell settings. New Bell Schedule  Tap [New Bell Schedule] on the Bell Schedule interface to add a new bell schedule. P a g e | 68 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 70 Punch States Options Tap [Punch States Options] on the Personalize interface to configure the punch state settings. Note: This function only for Time Attendance Terminal. P a g e | 69 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 71 Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys. On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the shortcut  key settings. P a g e | 70 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 72 On the Shortcut Key interface, tap Set Switch Time to set the switch time.  On the Switch Cycle interface, select the switch cycle (Monday,Tuesday, etc.) as shown in the image  below. P a g e | 71 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 73 To delete information and attendance logs/access records of all Delete All Data registered users. Delete Admin Role To remove all administrator privileges. Delete Access Control To delete all access data. P a g e | 72 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 74 Selecting [Delete by Time Range], you need to set a specific time range to delete all data within a specific period. Select Delete by Time Range Set the time range and tap [OK] P a g e | 73 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 75 Set specific location information of the device, including the block, unit, Information floor and door number. Transport Set the transport protocol between the device and indoor station. Protocol P a g e | 74 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 76 Set the DTMF type and DTMF value of the device, the value should be set to the same as the DTMF value of the indoor unit. Settings P a g e | 75 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 77 SpeedPalm-V5L User Manual The SpeedPalm-V5L and the indoor station to achieve video intercom there are two modes, respectively, the LAN and SIP server. 11.1.1 Local Area Network Use Enter the IP Address/Device Number of the Indoor Station  Set the indoor station to the same network segment as the device.
Page 78 Device Number: It is the device number that set in the Contact List Menu. IP Address: Once the device number is set, it will be automatically displayed. Then you can tap the icon on the SpeedPalm-V5L and tap the calling shortcut keys to call the indoor station. P a g e | 77 Copyright©2024 ZKTECO CO., LTD.
Page 79 Mode] > [Add]. Select the IP addresses of the indoor stations that you want to call, then the indoor stations will be displayed in the list. Then you can tap the icon on the SpeedPalm-V5L to call the indoor stations at the same time. P a g e | 78...
Page 80 User Manual 11.1.2 SIP Server On the SIP Settings interface, tap on [Local Settings] > [SIP Server] to enable it, enter the server- related parameters, as shown below: P a g e | 79 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 81 After correctly setting up the SIP, a green dot will appear in the upper right corner of the call page, indicating that the SpeedPalm-V5L is connected to the server. You can then initiate a call to the account name of the indoor station."...
Page 82 In default settings, new users are allocated into the first group with the default group time zone,  where the access combo is "1" and is set in unlock state by default. P a g e | 81 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 83 Normally Closed(NC): It means the door is always left closed when electric power is on. The supported verification mode includes Password/Card/Face/Palm, User Verification Mode ID Only, Password, Card Only, Password+Card, Password/Card, Face Only, Face+Password, Face+Card, Palm, Palm+Card, Palm+Face. P a g e | 82 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 84 Reset Access Setting normal open time period, master device, and alarm. However, erased access control data in Data Mgt. is excluded. Time Attendance Terminal: P a g e | 83 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 85 Reset Access Setting normal open time period, master device, and alarm. However, erased access control data in Data Mgt. is excluded. P a g e | 84 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 86 Tap the grey box to search the required Time Zone and specify the required Time Zone number (maximum up to 50 zones). On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday, etc.) to set the time. P a g e | 85 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 88 The newly enrolled user is assigned to Access Group 1 by default, but can be assigned to another access group. Tap [Access Groups] on the Access Control interface. P a g e | 87 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 89 N may all belong to one access group or may belong to five different access groups. Tap [Combined Verification] on the Access Control interface to configure the combined verification setting. P a g e | 88 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 90 So, to avoid such situations, the Anti-Passback option was developed. Once it is enabled, the check-in and check-out record must occur alternatively to open the door to represent a consistent pattern. This function requires two devices to work together: P a g e | 89 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 91 Set the device to in/out/none. Note: This function only for Time Attendance Device Status Terminal. Set the slave device to in/out/none. Note: This function only for Time Slave Device Attendance Terminal. P a g e | 90 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 92 1 to 999 seconds. Set the 6-digit duress password. When the user enters this duress password for Duress Password verification, an alarm signal will be generated. P a g e | 91 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 93 2. Select the time range in which the records need to be searched. If you want to search for records of all users, tap [OK] without entering any user ID. P a g e | 92 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 94 3. Once the record search completes. Tap the 4. The below figure shows the details of the record highlighted in green to view its details. selected record. P a g e | 93 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 95 To test the RTC. The device tests whether the clock works normally and accurately Test Clock RTC with a stopwatch. Touch the screen to start counting and press it again to stop counting. P a g e | 94 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 96 U disc export. Note: The current privacy policy's text is only available in Simplified Chinese/English. However, translation of other multi-language content is underway, with more iterations. P a g e | 95 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 97 Click [Device] > [Device] > [Add], to add the device on the software. A new window pops-up on clicking [Add]. Enter the required information about the device and click [Confirm], then the added devices are displayed automatically. P a g e | 96 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 98 Click [Device] > [Device] > [Data Transfer] > [Sync Data to Device] to synchronize all the data to the device including the new users. Note: For other specific operations, please refer to ZKBio Time User Manual. P a g e | 97 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 99 Software Side  Login to ZKBio CVAccess software, click [System] > [Communication] > [ Communication Monitor] to set the ADMS service port, as shown in the figure below: P a g e | 98 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 100 Click [Add] in the operation column, and a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e | 99 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 101 Click [Attendance] > [Attendance Device] > [Device Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users. Note: For other specific operations, please refer to ZKBio CVAccess User Manual. P a g e | 100 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 102 Software Side  Login to ZKBio CVSecurity software, click [System] > [Communication Management] > [Communication Monitor] to set the ADMS service port, as shown in the figure below: P a g e | 101 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 103 Click [Add] in the operation column, and a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e | 102 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 104 Click [Access] > [Access Device] > [Device Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users. Note: For other specific operations, please refer to ZKBio CVSecurity User Manual. P a g e | 103 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 105 Do not include more than one face in the capturing area. 50cm - 80cm is recommended for capturing distance adjustable subject to body height. Image1 Face Capture Area P a g e | 104 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 106 The captured person should be clearly seen, natural in color, and without image obvious twist, no shadow, light spot or reflection in face or background, and appropriate contrast and lightness level. P a g e | 105 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 107 Privacy Policy Notice: To help you better use the products and services of ZKTeco and its affiliates, hereinafter referred as "we", "our", or "us", the smart service provider, we consistently collect your personal information. Since we understand the importance of your personal information, we took your privacy sincerely and we have formulated this privacy policy to protect your personal information.
Page 108 Upon noticing that we have collected personal information of minors without the prior consent from verifiable parents, we will delete such information as soon as possible. P a g e | 107 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 110 The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 109 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 111 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.

ZKTeco SpeedPalm-V5L User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZKTeco SpeedPalm-V5L

Summary of Contents for ZKTeco SpeedPalm-V5L