Download Print this page

Pandora DXL 1013 Installation Instruction

For skoda octavia ii a5 2008-2014y

Advertisement

Quick Links

Pandora DXL
SKODA OCTAVIA II (A5) (2008-)
Installation instruction of Pandora DXL service-security system
for SKODA OCTAVIA II (A5) 2008-2014y.
model code 1013
This instruction has the status of a recommendation
support@pandorainfo.com
pandorainfo.com, pandorainfo.eu
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the DXL 1013 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pandora DXL 1013

  • Page 1 Pandora DXL SKODA OCTAVIA II (A5) (2008-) Installation instruction of Pandora DXL service-security system for SKODA OCTAVIA II (A5) 2008-2014y. model code 1013 This instruction has the status of a recommendation support@pandorainfo.com pandorainfo.com, pandorainfo.eu...
  • Page 2 Commands and statuses via CAN-bus Notes Statuses Commands * P – Parking lights Code Fuel level is displayed in liters. *Pandora will not fully disarm original alarm system if 1013 Control over original alarm SKODA system is enabled. Trunk and ●...
  • Page 3 Pandora DXL SKODA OCTAVIA II (A5) (2008-) Placing units (modules) and connections This instruction has the status of a recommendation support@pandorainfo.com pandorainfo.com, pandorainfo.eu...
  • Page 4 Pandora DXL SKODA OCTAVIA II (A5) (2008-) Connect to CAN1 and CAN2 Connect to CAN1 and CAN2 buses to the wires of the unit under the accelerator pedal. Connect to CAN1-bus. Orange/White(Pandora) Orange/Green – CAN1 HIGH Orange/Black (Pandora) Orange/Brown – CAN1 LOW Connect to CAN2-bus.
  • Page 5 Pandora DXL SKODA OCTAVIA II (A5) (2008-) Remote engine start connection Remote engine start circuits are connected to the wires of the ignition lock and the starter relay. This instruction has the status of a recommendation support@pandorainfo.com pandorainfo.com, pandorainfo.eu...
  • Page 6: Power Supply Connection

    Pandora DXL SKODA OCTAVIA II (A5) (2008-) Power supply connection Power (+12V) and (-) ground can be connected to the wire of the brown connector on the fuse box. This instruction has the status of a recommendation support@pandorainfo.com pandorainfo.com, pandorainfo.eu...
  • Page 7 Bypass of the original immobilizer Bypass of the original immobilizer is performed via CAN-bus. The system is programmed for the standard KEY start logic. System settings Apply the next settings in Pandora Alarm Studio: Select 2.3.3 "Bypass via CAN" option. Menu Submenu...
  • Page 8 Pandora DXL SKODA OCTAVIA II (A5) (2008-) Learning procedure. In order to bypass original immobilizer, learning procedure is required. Enter the programming mode, then press VALET button 17 times to enter programming level №17. LED will confirm the input with 17 flashes and a siren (beeper) will sound 17 beeps.
  • Page 9: Cloning Procedure

    Windows (XP, 7, 8, 10) and Internet connection. Enter the programming mode. Run Pandora AlarmStudio, login to the system. Confirm the sending data to the server. After that data will send to the server and cloning procedure will be performed. The procedure usually takes up to 4 min.