Page 1
INSTRUCTIONS FOR USE Ambu SureSight Connect ® ™ For use by individuals who have been trained and authorized to use video laryngoscopes. For use in hospital environments. For use with Ambu displaying units. ®...
Connect refers to instructions that apply to Connect only, and Video Laryngoscope refers to information relevant to the system. The Video Laryngoscope consists of Connect, a compatible Ambu displaying unit and a Blade. Instructions for use for the Ambu displaying unit and Blade are provided separately with the respective devices.
4. Prior to use, set up the Video Laryngoscope according to the instructions in section 3. 5. Only use Connect with compatible Ambu devices, as described in section 2.2. Failure may result in damage to the device or in patient/user injury. 6. Ensure the Blade connector on Connect is dry before using it. Failure may cause the device to malfunction or cause electric shock.
If, during the use of this device or because of its use, a serious incident occurs, report it to the manufacturer and to your national authority. 2. Device description Connect is designed to be used in combination with Blade and a compatible Ambu displaying unit. 2.1. Device parts Ambu®...
Page 9
If there is no image, or if the image is blurred, see the Troubleshooting section. 8. Perform the procedure. Note: A live image is displayed on the compatible Ambu displaying unit within 5 seconds after connecting the Video Laryngoscope and turning on the Ambu displaying unit. Graphical user interface, image processing, and image capture and recording features are not available until the full startup of the Ambu displaying unit is complete.
Stop the video recording by another long press. You can capture an image while recording videos. See instructions for capturing images. Images and videos are stored on the compatible Ambu displaying unit. If you need to transfer images and videos, see the instructions for use for the Ambu displaying unit you are using.
Page 11
Procedure 1 – Enzymatic detergent cleaning and Super Sani-Cloth® or diluted isopropyl alcohol disinfection Cleaning Use an enzymatic alkaline detergent, e.g., Cidezyme™ from ASP, prepared in accordance with the manufacturer’s instructions. Clean according to the following instructions: 1. Soak clean lint-free gauze in the enzymatic alkaline detergent and make sure that the gauze is moist and not dripping.
Note: The specified cleaning and disinfection procedures show compliance with the AAMI TIR12:2020 and AANSI AAMI ST98:2022 guidelines. Other cleaning and disinfection solutions have not been verified to prove efficacy. If other cleaning and disinfection solutions are used, contact your local Ambu representative. 3.5. Maintenance and disposal Maintenance Connect must be cleaned and disinfected as indicated in section 3.4.
If you experience any problems with the system or product, use this troubleshooting guide to identify the cause and correct the error. Problem Possible cause Recommended action Compatible Ambu Turn on the compatible Ambu displaying unit is displaying unit. turned off. No Blade is connected. Attach Blade to Connect.
Page 14
(2) years from the date of invoice. Under this limited warranty, Ambu will be responsible only for either supplying authorized spare parts or replacement of the device, as Ambu may decide in its sole discretion.
In no event shall Ambu be liable for any indirect, incidental, consequential or special damages of any kind (including without limitation loss of profits or loss of use), whether or not Ambu shall be or should be aware of the possibility of such potential loss or damage.
Page 16
Ambu A/S Ambu Ltd Baltorpbakken 13 First Floor, Incubator 2 2750 Ballerup Alconbury Weald Enterprise Campus Denmark Alconbury Weald T +45 72 25 20 00 Huntingdon PE28 4XA ambu.com United Kingdom www.ambu.co.uk Ambu and other trademarks are trademarks of Ambu A/S...
Need help?
Do you have a question about the SureSight Connect and is the answer not in the manual?
Questions and answers