Icom IC-02A/AT/E Instruction Manual page 5

@®RUGGED CONSTRUCTION
@®EASY-TO-READ DISPLAY
@®DUAL POWER LEVELS
@®VARIOUS ACCESSORIES
AVAILABLE
Constructed with an all metal chassis, stainless steel battery slide
rails, reinforced die-cast aluminum back as well as moisture and dust
resistant seals, the IC-O2A/AT/E is built to stand up to the most
demanding environments.
This set employs an easy-to-read LCD readout. This displays the
operating frequency as well as the memory channel number, duplex
mode, scan mode, lock function, tone encoder enable indicator, etc.
In addition an S/RF meter is provided in the form of a segmented
LCD bar across the bottom of the display.
Transmitter output can be switched easily between two levels; 3W
output HIGH for long distances and 0.5W LOW for short distances.
Battery consumption will be minimized in the LOW power mode.
The IC-BP7 power pack as an option gives 5W output and the
standard aluminum case back provides superior heat sinking when
the unit is run at that level.
All 1C-2 series accessories are compatible with the IC-O02 series plus
there are new options such as the IC-BP7 and IC-BP8 battery packs
and the HS-51 HEADSET (with VOX function).