Icom IC-02A/AT/E Instruction Manual page 43

To clear the scan function, push the ''A'' (CL) key, and the scan
stops on the frequency displayed and the letter ''S'' on the
frequency display goes out.
(9) When the set is in this scan mode, all key functions except the
"A" (CL) key and the "'C" (PS) key are disabled.
@When 145.600MHz is memorized in memory channel 5 and 145.800MHz in memory channel 6, and the
frequency step rate is set at 25kHz:
Push key
Display
(In DIAL MODE)
OWES or PTT
Push key
(M6 frequency)
(Returns to M5 frequency)
switch
Display
mae A (\nes