Icom IC-02A/AT/E Instruction Manual page 25

PRIMARY FUNCTION SECONDARY FUNCTION
Bee
KEY FUNCTION KEY FUNCTION
Sets the digit of 7. Sets a desired receive/transmit frequency
separation.
a LZ
Push this key, then the desired separa-
tion frequency using four digits.
Gemthedigofe,. i "98 8 | |e ewoee OP nee eee ee
Sets the digit of 9. ace Turns on and off the beep tone circuit
[s | co7 which generates a tone when a key is
pushed.
[0 ] Sets tnerdigit or O. 80 ee ee eee eee
ag Decreases the operating frequency with PY Sets the ''—'' duplex mode. Push the
specified steps, or operating memory key again to change to the simplex mode.
channel number.
wy Increases the operating frequency with wes Sets the ''+'' duplex mode. Push the key
ae] specified steps, Or operating memory (=) again to change to the simplex mode.
channel number.
Clears the entered number, and recalls | ----- |- ---3-+-+-+er-
previous frequency or clears previous
number to "00".
ave Clears the memory channel mode and
lects the DIAL mode.
Be
Clears the priority function.
Clears any scan function and the operat-
ing frequency or memory channei stops
on the displayed one.
cel 9 ae