Icom IC-02A/AT/E Instruction Manual page 32

390.
(4) SETTING DUPLEX (1) While pushing the ''FUNC" key, push the ''7'' (SHIFT) key, then
FREQUENCY SEPARATION the four digit keys (MHz to kHz digits) of the desired frequency
separation (IC-O2E: three digit keys (MHz to 10kHz) of the
desired frequency separation).
(2) If illegal digits have been entered, the entered ones are cancelled
and the previous frequency separation will be recalled.
(3) The last digit entered has some limitations, the same as
"SETTING FREQUENCY" on page 23.
@When setting the frequency separation for +600kHz/+0.60MHz (for IC-O2A/AT):
Push key Loy ae Lo |
(Release)
Push key eas
Storing the
frequency shift
Push key direction.