Icom IC-02A/AT/E Instruction Manual page 34

ay Eee
@M1 (MEMORY CHANNEL "1")
eM4
@M5 and M6
eM7 ~ MO
The offset frequency for duplex operation in M1 will be the offset
and tone applied to memory channels M2 ~ M6. That is, memory
channels 1 ~ 6 will have the same offset and tone entered in M1.
The frequency memorized in M3 can be recalled by just pushing the
"D" (CALL) key.
The frequency memorized in M4 will be the priority frequency on
priority scanning. The priority scan is described on page 34.
The frequencies memorized in M5 and M6 will be the limits of the
programmed scanning range. Regardless of which channel the higher
frequency is memorized in, the scan starts from the frequency
memorized in memory channel 5.
The offset frequency and tone number can be memorized into each
memory channel independently.
@When memorizing 145.68MHz into memory channel 7 (M7):
(Release)
Push key
Display