Icom IC-02A/AT/E Instruction Manual page 33

(4) To change the duplex direction (+tduplex to —duplex or vice
versa) with the previous frequency separation, while pushing the
"FUNC" key, push the ''*'' (—) or the "#''(+) key for the new
direction desired.
(5) To change the duplex mode to simplex mode, push the '""FUNC"'
key and the ''*'' (—) or "#'" (+) key with the same symbol
(+ or —) as appears on the display.
@When changing the duplex direction:
iv /— |]
Push key
(5) MEMORY WRITING (1) To memorize a frequency, duplex mode, its frequency separation
and tone number into a memory channel, set the desired fre-
quency, duplex mode, etc., with the procedures described before.
Then, while pushing the ""FUNC" key, push the '"'B'' (MEMORY
WRITE) key, followed by a digit key which has the same number
as the memory channel number.
(2) The radio has 10 memory channels, memory channel 1 ~ memory
channel 0. Some are special channels as follows:
30