Icom IC-02A/AT/E Instruction Manual page 35

(6) TURNING THE BEEP Each push of the ''9'' (BEEP) key while depressing the ""FUNC" key
TONE ON/OFF turns the beep tone ON and OFF alternately. When the tone is ON,
the beep sounds each time a key is pushed. The volume of the beep
tone can be adjusted by turning the VOLUME control the same as
the receiver audio volume control.
(7) STARTING THE By pushing the ''C'"' (PS) key while depressing the '"FUNC" key, the
PROGRAMMED SCAN programmed scan is started. The programmed scan scans between
FUNCTION the frequencies memorized in memory channels 5 and 6. More
detail is described later.
6-5 MEMORY CHANNEL MODE
(1) MEMORY READ To recall a frequency memorized in a memory channel, push the
""B'' (MR) key then a digit key of the same number as the memory
channel which contains the desired frequency. The duplex mode
and/or tone number (IC-O2AT only) also can be recalled at the same
time if they have been memorized.
@When recalling the frequency memorized in memory channel 7:
Push key
(In DIAL MODE)
Display
ake 5? See