Related Manuals for Beckman Coulter Biomek i Series
Summary of Contents for Beckman Coulter Biomek i Series
- Page 1 Instruction For Use Biomek i-Series HEPA Filter Kit C16028AB November 2017 Beckman Coulter, Inc. 250 S. Kraemer Blvd. Brea, CA 92821 U.S.A.
- Page 2 PN C16028AB (November 2017) © 2017 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries.
-
Page 3: Revision History
Revision History For updates, go to www.beckmancoulter.com and download the latest version of the manual or system help for your instrument. Initial Issue C16028AA, 08/2017 Issue Version AB, 11/2017 Changes or additions were made to: Maintenance and Cleaning Procedure. Note: Changes that are part of the most recent revision are indicated in text by a bar in the margin of the amended page. - Page 4 Revision History C16028AB...
-
Page 5: Safety Notice
Beckman Coulter, Inc., urges its customers and employees to comply with all national health and safety standards such as the use of barrier protection. This may include, but is not limited to, protective eyewear, gloves, and suitable laboratory attire when operating or maintaining this or any other automated laboratory instrumentation. -
Page 6: Labels
Safety Notice Labels CAUTION CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. IMPORTANT IMPORTANT is used for comments that add value to the step or procedure being performed. Following the advice in the IMPORTANT adds benefit to the performance of a piece of equipment or to a process. -
Page 7: Table Of Contents
Unit, 3 Airflow Testing, 3 Maintenance and Cleaning Procedure, 4 Cleaning, 4 Filter Replacement, 5 Specifications, 6 Troubleshooting, 7 Replacement Parts, 7 Beckman Coulter, Inc. Customer End User License Agreement LIMITATIONS OF LIABILITY, 1 Warranty and Returned Goods Requirements, 1... - Page 8 Illustrations Illustrations HEPA Filter Kit front (Biomek i-7 filter unit shown), 2 AC Power Connector, 3 Replace pre-filter, 5 viii...
- Page 9 Tables Tables Biomek i-Series Enclosed Models and HEPA Filter Kit Numbers, 1 Specifications, 6 Solutions to common problems, 7...
- Page 10 Tables...
-
Page 11: Hepa Filter Kit
HEPA Filter Kit Introduction The HEPA Filter Kit is an optional accessory designed for the Biomek i-Series Automated Workstation. The HEPA Filter Kit provides a positive pressure environment with HEPA filtered air inside the Biomek. Configuration and Installation Several different HEPA Filter Kits are available. Select the correct kit based on the model of your Biomek i-Series instrument and the electric voltage in your lab. -
Page 12: Features
HEPA Filter Kit Features Features Figure 1 HEPA Filter Kit front (Biomek i-7 filter unit shown) 1. Pre-filters 2. Frame 3. On/off variable speed controller The HEPA Filter Kit features the following main components: • Fan Filter Unit: The Fan Filter Unit is designed to provide continuous air flow and filtration to the Biomek workspace. -
Page 13: Operating The Hepa Fan Filter Unit
NOTE No claim is established for particulate matter inside the Biomek workspace. If a specific particulate level is required, Beckman Coulter recommends using a certification provider to determine and execute the necessary testing. * See the manufacturer’s website at http://www.dfmzgroup.com/products.php?catID=1&productID=6... -
Page 14: Maintenance And Cleaning Procedure
HEPA Filter Kit Maintenance and Cleaning Procedure Maintenance and Cleaning Procedure The HEPA Filter Kit was designed to allow for simple filter changes and cleaning. Advanced maintenance tasks should be performed by a Beckman Coulter Service representative. For additional support, contact WARNING Risk of operator injury if: •... -
Page 15: Filter Replacement
HEPA Filter Kit Maintenance and Cleaning Procedure Filter Replacement The HEPA filter should be changed regularly as part of a preventive maintenance schedule. Contact to complete any necessary maintenance activities. Change pre-filters on a schedule determined by your need and the ambient air quality. It is recommended that the pre-filter on the unit be changed every 2-3 months for the first year. -
Page 16: Specifications
HEPA Filter Kit Specifications Specifications Table 2 Specifications Item 2’ x 2’ (i-5) 2’ x 3’ (i-7) Speed control full with no pre-filter 442 cfm 730 cfm Dimensions Width x Depth x Height 60 cm x 60 cm x 28.6 cm 60 cm x 90.5 cm x 28.6 cm 23.62”... -
Page 17: Troubleshooting
HEPA Filter Kit Troubleshooting Troubleshooting Table 3 Solutions to common problems Problem Cause Solution Fan filter unit does not start. Electric power cord may not be Make sure plug fits tightly into plugged in or connection may be outlet. loose. Fuse blown, circuit breaker Reset breaker or replace fuse. - Page 18 HEPA Filter Kit Replacement Parts C16028AB...
-
Page 19: Beckman Coulter, Inc
In no event shall Beckman Coulter, Inc.’s liability to the user exceed the amount paid by the user to Beckman Coulter, Inc. hereunder. The user assumes full responsibility for the results obtained from the use of this system and related documentation and for application of such results. - Page 20 Company. Parts replaced during the warranty period are warranted to the end of the instrument warranty. NOTE: Performance characteristics and specifications are only warranted when Beckman Coulter, Inc. replacement parts are used.
-
Page 22: Related Documents
Integration Manual for Biomek i-Series Tutorials PN B59001 Biomek FX/FX , NX/NX , and PN B54475 i-Series Instruments PN A93393, Rev. AC and up Automated Labware Positioners (ALPs) Instructions For Use PN 987836 www.beckmancoulter.com © 2017 Beckman Coulter, Inc. All Rights Reserved...
Need help?
Do you have a question about the Biomek i Series and is the answer not in the manual?
Questions and answers