Operation; Operation Sequence - NSD Absocoder NPG-210HAAVT Specifications & Instruction Manual

9. OPERATION

9-1. Operation Sequence

Setting
(1) Designate the function selector switches which is at
rear face of the converter.
(2) Set the pulse number.
Converter mounting
Mount the converter.
Connect the power supply to the converter.
Connect with external device
Connect ABSOCODER sensor and control device to the
converter.
Test run
Check the operation.
The setting should be modified when the pulse number
doesn't match with the specification.
Operation
Execute operation.
START
END
32
-------- Refer to section 9-2, 9-3
-------- Refer to section 6-1, 7-1
-------- Refer to section 7-2, 7-3