Eagle Group S4-5B-SSW1824C Assembly Instructions

PART #A223459
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
PLE SE NOTE:
Once the brackets are attached to the
wall studs (as shown in tep 1),
shelves can be positioned anywhere
along the wall brackets without the
use of fasteners.
Step 1 - Mount brackets in relation to studs
behind wall, using bolts and washers
—do not tighten hardware!
Note: Make sure to mount brackets
at the same height. This will ensure
level shelving.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
Piggyback Wall-Mounted
Shelf Kits
ASSEMBLY INSTRUCTIONS
CAUTION
SAVE YOUR BOX AND ALL PACKING MATERIALS.
*** Please note: Hardware not included. ***
stud behind wall
bracket
bolt
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
® , and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
(FRONT VIEW)
fender
washer
.
(continued on back page)
EG10095 Revised 11/08