Eagle Group Snap-n-Slide Assembly Instructions

PART #368038
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Step 1 - Mount brackets in relation to studs behind wall.
Brackets must be vertically level with each other. Using a laser level is highly recommended.
stud behind
wall
wall
bracket
wall
Step 2 -
Slide the wall shelf into desired placement.
In order for proper bonding of the tape adhesive, ensure the bottom of
the shelf is free of dirt, oil and other contaminants prior to installation.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Snap-n-Slide
with Ticket Rail
ASSEMBLY INSTRUCTIONS
SAVE YOUR BOX AND ALL PACKING MATERIALS.
level line
left-hand
wall bracket*
* Quantity of wall brackets varies with length of shelf.
• 100 Industrial Boulevard, Clayton, Delaware 19938-9905 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
® Wall Shelves
CAUTION
wall
right-hand
wall brackets*
Step 3 -
Hold shelf in place and peel off tape backing.
wall
shelf
tape
backing
Rear upturn of wall shelf hooks under tab of each bracket.
CAUTION:
• Wall brackets must be
mounted in relation to
studs behind wall.
• Wall brackets must be
fastened securely prior to
mounting shelf.
• Eagle Group cannot be held
responsible for the failure
to use the appropriate
secure mounting method.
wall
bracket
(continued on back page)
EG10089 Revised 04/08
tab on
bracket
upturn
on wall
shelf