Eagle Group Spec-Bar 389291 Assembly Instructions

inStRuCtiOn SHEEt
#389291
inSPECt COntEntS iMMEDiAtELY AnD FiLE CLAiM WitH DELiVERinG CARRiER FOR AnY DAMAGE.
YOu ARE RESPOnSiBLE FOR DAMAGE tO YOuR unit iF REtuRnED i MPROPERLY PACKED.
#
1
2
3
4
5
6
Step 1 - ssemble bottle support and
one of the brackets.
• Lay bottle support with
solid plastic side up.
• Insert screws through left
or right bracket, as shown.
DO NOT FULLY TIGHTEN.
Step 3 - Install bottle stay.
IMPORT NT: Make sure
the solid plastic surface
faces the RE R of the
speed rail.
Insert screws through
brackets, as shown. DO
NOT FULLY TIGHTEN.
Eagle Foodservice Equipment, Eagle MHC, and SpecFAB
Spec-Bar ®
ASSEMBLY INSTRUCTIONS
See reverse side for Spec-Bar
SAVE YOUR BOX AND ALL PACKING MATERIALS.
Parts List
Quantity description
8 Screw, 1/4–20 x 1˝
1 Bottle Stay
1 Bottle Support
1 Left Bracket
1 Right Bracket
1 Snap-On Clear Molding
bottle
support
right end
bracket
bottle
stay
Single Speed Rails
® Double Speed Rails.
CAUTION
#1
#4
#2
#3
Step 2 - Install remaining bracket.
Insert screws through
bracket, as shown. DO
NOT FULLY TIGHTEN.
screws
Step 4 - ffix bottle labels
(not included) onto top
of stay, as needed. Snap
clear molding onto bottle
stay.
Tighten all screws securely
FTER installing speed rail
onto your equipment.
(End)
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. .
• Phone: 302/653-3000 • 800/441-8440
• Fax: 302/653-2065 • www.eaglegrp.com
are divisions of Eagle Group. ©2021 by the Eagle Group
®
#6
#5
left end
bracket
screws
EG9943
clear
molding
Revised 05/21