Eagle Group SK-17 Assembly Instructions

INSTRUCTION SHEET
#A226596
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
#4
Step 1 - ttach split sleeves
(for bottom 4-sided truss
frame) to posts.
Snap split sleeve onto each post at
groove #5 (the wider part of the
taper goes toward the bottom).
split
sleeves
5
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
#SK-17 Heat Lamp Display Kit
ASSEMBLY INSTRUCTIONS
SAVE YOUR BOX AND ALL PACKING MATERIALS.
Parts List
#1
#5
#2
#6
#3
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
® , and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
CAUTION
# qty
#1 1
#2 1
#3 1
#4 4
#5 4
#6 2
#7 4
#8 3
#8
#7
Step 2 - ssemble 4-sided truss frame to posts.
post
4-sided
truss
frame
description
14˝ x 48˝ wire shelf
14˝ x 48˝ three-sided truss frame
14˝ x 48˝ four-sided truss frame
74˝ posts
hooks
heat lamp brackets
screws, #8-32 x 3/8˝
bags of 4 split sleeves
4-sided
truss
frame
(continued on back page)
EG9858 Revised 03/11
split
sleeve