Download Print this page

Eagle Group KBD-2/SS Assembly Instructions

Keyboard drawer for 24˝ & 30˝ wire shelves

Advertisement

Quick Links

INSTRUCTION SHEET
#A221655
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING
CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Thank you for your purchase. Before assembly, read this instruction sheet carefully.
After reading, be sure to store this instruction in a safe place, should it be needed for future reference.
#1
#2
#3
#6
#KBD-2/SS Keyboard Drawer
for 24˝ & 30˝ Wire Shelves
ASSEMBLY INSTRUCTIONS
CAUTION
SAVE YOUR BOX AND ALL PACKING MATERIALS.
Parts List
#
qty
4
1
1
2
1
3
1
4
1
5
1
6
#4
hardware (not shown)
8
8
8
#5
description
hooks
left-hand bracket
left-hand slide
right-hand bracket
right-hand slide
keyboard drawer
screws
washers
hex nuts
(continued on back page)
EG9838 Revised 01/25

Advertisement

loading
Need help?

Need help?

Do you have a question about the KBD-2/SS and is the answer not in the manual?

Questions and answers

Summary of Contents for Eagle Group KBD-2/SS

  • Page 1 #KBD-2/SS Keyboard Drawer INSTRUCTION SHEET #A221655 for 24˝ & 30˝ Wire Shelves ASSEMBLY INSTRUCTIONS CAUTION INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS. YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
  • Page 2 #KBD-2/SS Keyboard Drawer for 24˝ & 30˝ Wire Shelves ASSEMBLY INSTRUCTIONS rear bracket holes for 24˝ shelf rear bracket holes for 30˝ shelf Before assembly… left bracket • Note the front-to-back dimension (24˝ or 30˝) of your wire shelf. right bracket •...
  • Page 3 #KBD-2/SS Keyboard Drawer for 24˝ & 30˝ Wire Shelves ASSEMBLY INSTRUCTIONS Please note: For instructional purposes, this instruction sheet will show assembly of keyboard drawer to a 24˝ wire shelf. Step 2 - Attach brackets to wire shelf. • Position bracket up to the bottom...
  • Page 4 #KBD-2/SS Keyboard Drawer for 24˝ & 30˝ Wire Shelves ASSEMBLY INSTRUCTIONS Step 4 - Attach outer slide components to brackets. • Attach outer slide component to bracket with bolt, washer, and hex nut at the holes shown in illustration. • Repeat with remaining outer slide component and bracket.