Advertisement
Quick Links
instruction sheet
#A229300
Thank you for your purchase. Before assembling shelving unit, read this instruction manual carefully to ensure correct use.
fter reading, be sure to store this instruction in a safe place, should it be needed for future reference.
unit shipped knocked down. inspect contents iMMediAteLY And FiLe cLAiM with
deLiVerinG cArrier For AnY dAMAGe. SAVE YOUR BOX AND ALL PACKING MATERIALS.
You Are responsiBLe For dAMAGe to Your unit iF returned iMproperLY pAcked.
W RNING: Do not exceed the maximum weight limit of 600 lbs. per shelf, evenly distributed.
C UTION: Evenly distribute the weight across each shelf, and keep the heavier loads on the bottom.
C UTION: When shelves are at the optional 15˚ angle, the weight is no longer evenly distributed
If this product is defective, contact the Customer Service team at 1-800-441-8440 or visit www.eaglegrp.com.
eagle Foodservice equipment, eagle Mhc, specFAB
Q-LEVER Cantilever Shelving
ASSEMBLY INSTRUCTIONS
CAUTION
Q-L V R unit with
all-wire shelving
S FETY INFORM TION
and load capacity is decreased.
C UTION: Place the unit on a level surface to avoid a tipping hazard.
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
®
, and retail display are divisions of eagle Group. ©2018 by the eagle Group
Q-L V R unit with
bottom dunnage shelf
Warranty
(continued on next page)
eG9973
revised 03/18
Advertisement
Summary of Contents for Eagle Group Q-LEVER unit with all-wire shelving
- Page 1 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 eagle Foodservice equipment, eagle Mhc, specFAB ® , and retail display are divisions of eagle Group. ©2018 by the eagle Group...
- Page 2 FOR YOUR S FETY These instructions and safety information should be reviewed with all store personnel, and along with all other instructions for your Eagle Group products, must be preserved and provided to any subsequent user or purchaser of these fixtures.
- Page 3 Q-LEVER Cantilever Shelving ASSEMBLY INSTRUCTIONS IMPORTANT EVENLY DISTRIBUTED LO D NOT TO EXCEED THE FOLLOWING WEIGHT C P CITIES: left-to-right weight capacity weight capacity weight capacity total unit max. nominal length of top (wire) shelf per mid (wire) shelf of bottom shelf weight capacity Units with ll-Wire Shelving 24˝...
-
Page 4: Tools Required
Q-LEVER Cantilever Shelving ASSEMBLY INSTRUCTIONS Step 1 - ttach feet to legs and assemble to uprights. Tools required: • Insert foot into leg (see figure 1a). • 1/2˝ socket or wrench Several solid blows with a mallet are • 5/8˝ socket or wrench usually required. - Page 5 Q-LEVER Cantilever Shelving ASSEMBLY INSTRUCTIONS brace X-brace Step 4 - ssemble BR CE and bottom of X-BR CE to bottom of uprights. • Rearrange so that bottom of X-BR CE is OVERL PPING the X-brace BR CE (see figure 4a). •...
- Page 6 Q-LEVER Cantilever Shelving ASSEMBLY INSTRUCTIONS Step 7 - Install shelf. corner collars • Place the shelf onto pair of brackets, lowering the corner collars of shelf onto the four bracket tabs. bracket tabs shelf collars and bracket tabs Repeat Steps 6 & 7 to install the remaining brackets and shelves.
- Page 7 Q-LEVER Cantilever Shelving ASSEMBLY INSTRUCTIONS For ssembly with dd-On Units… Working from one end to the other, install hardware as indicated in Steps 1 thru 5. fter installing shelves, tighten bolts as indicated in Step 8. NOTE: QLOK bracket lok required for Q-LEVER brackets and flat washer shelves to be at same level on shared uprights.
- Page 8 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S. . • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 eagle Foodservice equipment, eagle Mhc, specFAB ® , and retail display are divisions of eagle Group. ©2018 by the eagle Group...