Final Inspection With Road Safety And Functional Check; (Inspections I, Ii, Iii And Iv); Road Safety Check; Roadworthiness Check - BMW R 1200 C Repair Manual

Final inspection with road safety
and functional check

(Inspections I, II, III and IV)

Road safety check

•
Check wheels and tyres.
•
Check/correct tyre pressures.
•
Wait at least 10 minutes after the trial run/road
test before checking/correcting engine oil level.
Tyre pressures:
Solo ..................................... front 2.2 bar (31.3 psi)
............................................. rear 2.5 bar (35.6 psi)
With pillion passenger .......... front 2.5 bar (35.6 psi)
............................................. rear 2.7 bar (38.4 psi)
With pillion
passenger + luggage............ front 2.5 bar (35.6 psi)
............................................. rear 2.9 bar (41.2 psi)

Roadworthiness check

•
Lights
•
Telltale/warning lights
•
Horn
•
Instruments
•
Special equipment
•
Clutch
•
Gear shift
•
Steering
•
Foot brake and handbrake
•
Trial run if necessary
00.28