Checking Brake Pads And Discs For Wear/Renewing; (Inspections Ii And Iii); Checking Front Brake Pad Wear; Checking Rear Brake Pad Wear - BMW R 1200 C Repair Manual

Checking brake pads and discs for
wear/renewing

(Inspections II and III)

Checking front brake pad wear

•
Examine the wear limit marks (arrows).
e
Caution:
Brake pad thickness must not fall below the minimum
value.
Change pads only as a complete set.
Minimum lining thickness: .......... 1.5 mm (0.06 in)

Checking rear brake pad wear

It should not be possible to see the brake disc
through the hole (arrow) in the inner brake pad.
C000100
If the brake disc is visible, the wear limit has been
reached and the pads must be renewed.

Checking brake disc wear

C000110
•
Examine the brake discs carefully for cracks,
damage, distortion, wear and score-marks.
Brake disc wear limit:
front:........................................... 4.5 mm (0.177 in)
rear:............................................ 4.6 mm (0.181 in)
C000120
C000130
00.19