Subscribe to Our Youtube Channel
Related Manuals for SCHUNK VERO-S NST3
Summary of Contents for SCHUNK VERO-S NST3
- Page 1 Quick-change pallet system VERO-S NST3 Assembly and Operating Manual Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK SE & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 1344367 Version: 03.00 | 04/02/2025 | en...
-
Page 3: Table Of Contents
4.4 Clamping pins SPA 40, SPB 40, SPC 40, SPG 40 ..........20 4.4.1 Information to clamping pin SPG 40 ..........21 4.5 VERO-S tombstones (optional) ..............21 4.6 Screw tightening torques ..............22 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... - Page 4 9.3 The quick-change pallet systems no longer open quietly ......30 10 Parts lists ................... 31 10.1 Part lists.................... 31 11 Assembly drawing ................32 12 Manufacturer certificate................. 33 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
-
Page 5: General
Assembly and Operating Manual for VERO-S quick-change pallet system NSE3 * Assembly and Operating Manual for VERO-S tombstone VAT / VAT3 * The documents labeled with an asterisk (*) can be downloaded from schunk.com/downloads. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 6: Sizes
SAT tombstones SAT NSF plus tombstones SPA, SPB, SPC, SPG clamping pins SDE protection cover ASL2-G1/8“ connecting strip VSK Ø10-NW7.4 locking coupling for air supply Torque wrench 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 7: Basic Safety Notes
Modifications, changes or reworking, e.g. additional threads, holes, or safety devices, can damage the product or impair its functionality or safety. Structural changes should only be made with the written approval of SCHUNK. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 8: Spare Parts
All work must be performed by appropriately qualified personnel. Personnel must have read and understood the complete manual before beginning any work on the product. Observe country-specific accident prevention regulations and the general safety notes. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 9: Personal Protective Equipment
All work must only be performed by appropriately qualified personnel. Secure the system against accidental operation during all work. Use suitable assembly and transport equipment and take precautions to prevent jamming and crushing. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 10: Protection During Commissioning And Operation
Incorrect handling of disposal can make the product unsafe and lead to risks of environmental harm. Follow local regulations on dispatching product components for recycling or proper disposal. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 11: Fundamental Dangers
For modules with media transfer units, ensure the loading weight on the change interface is sufficient to ensure the surface of the interface is level with the module. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... - Page 12 Do not control the media transfer units until the device is clamped on the quick-change pallet systems. Take suitable protective measures to secure the danger zone. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
-
Page 13: Technical Data
The actuating pressure for the unlocking function must be set to at least 5 bar up to a maximum of 6 bar. The actuating pressure for the turbo function must not exceed 6 bar. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 14: Assembly
The T-nuts are not included in the scope of delivery of the clamping station. Alignment using T-nuts 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 15: Alignment Using Alignment Elements
The brass bore hole cover plates of the mounting screws may only be used for stationary applications of the clamping station. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... - Page 16 Example for clamping specification ISO 10 579 - NR set-up to A at 8 mounting locations with DIN EN ISO 4762 10.9 M12 screws, tightening torque 88 Nm NST3 set-up 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
- Page 17 When decoupling hose lines, the pneumatic plug-in connection or the sealing nipple must be protected against the ingress of dirt or coolant. The sealing nipple comes with a plastic cover plug. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
-
Page 18: Nst3 400-250
(accessory). Reduced material thickness in marked areas Reduced material thickness in marked areas Bore holes permitted in shaded areas 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 19: Nst3 500-300
Reduced material thickness in marked areas Reduced material thickness in marked areas Bore holes permitted in shaded areas 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 20: Clamping Pins Spa 40, Spb 40, Spc 40, Spg 40
SPC 40-16 0471066 > 13 > 18 > 18 > 24 > 16 * The length of the screwed-in thread must not exceed the dimension "G" under any circumstances! 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 21: Information To Clamping Pin Spg 40
400 x 400 mm and 500 x 500 mm. The tombstones can be equipped with VERO-S zero point clamping pins, thus achieving a highly precise change-repeat accuracy together with the clamping station. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 22: Screw Tightening Torques
The fixing screws used for the clamping modules must be tightened according to the torque specifications for reinstallation. (Screw quality 10.9) Screw size Tightening torques (Nm) 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 23: Function
Since VERO-S NSE3 clamping modules are spring-operated clamping systems, the connection must remain pressurized with compressed air (at least 5 bar) during the set-up / changing process. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 24: Turbo Connection
Locking coupling type: VSK Ø 10- NW7.4 ID: 1344010 (accessory) Open air connection module Sealing nipple NW7.4 (scope of Air connection turbo function delivery) Connections on the clamping station 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 25: Vero-S Connecting Strip Asl2-G1/8" (Optional)
Sealing nipple NW 7.4 Fastening screws with air supply (G1/8") Locking coupling type: VSK Ø 10-NW7.4 ID: 1344010 (accessory) Air connection turbo function Open air connection module 2x connecting strip ASL2-G1/8" 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 26: Operation
Do not reach into the clamping module. Use pressure maintenance valves. Use loading devices. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 27: Maintenance And Care
The system may only be commissioned again once the faults have been corrected. For example, by replacing the damaged unit. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 28: Leak Test
Leaks at the plug-in connections or in the pneumatic lines, for example, must be sealed and any defective components replaced. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 29: Storage
Only store the product in dry rooms. Protect the product from major temperature fluctuations. NOTE: Before recommissioning, clean the product and all attachments, check for damage, functionality and leaks. 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 30: Troubleshooting
Remove the clamping pallet and clean the and on the clamping pin are dirty clamping faces on the clamping slides and on the clamping pins. Clean all clamping modules installed on the clamping slides 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 31: Parts Lists
M16 cover to close the bore M18 cover to close the bore Sealing ring Sealing nipple G1/8 O-ring VERO-S NSE3 138 Eye bolt DIN580 M12 Cover plug for VERO-S 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 32: Assembly Drawing
Assembly drawing 11 Assembly drawing ** Included with VERO-S NSE3 Included with VERO-S NSE3 * contained in accessory kit ** for NST3 500-300 additionally contained in accessory kit 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... -
Page 33: Manufacturer Certificate
VDMA 34192:2019 Safety requirements for clamping devices for use on machines Mengen, 19th of July 2023 p.p. Philipp Schräder p.p. Alexander Koch Head of Development standard products Head of Engineering Design special products 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367... - Page 34 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
- Page 35 03.00 | VERO-S NST3 | Quick-change pallet system | en | 1344367...
- Page 36 H.-D. SCHUNK GmbH & Co. Spanntechnik KG Lothringer Str. 23 D-88512 Mengen Tel. +49-7572-7614-0 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the VERO-S NST3 and is the answer not in the manual?
Questions and answers