Operation Timing - Minolta MAGICOLOR 2300 Service Manual

4-3.

Operation Timing

• A specific function of image stabilization control is carried out as required according to
the situation.
Operating Timing
• When a new Image Transfer Belt
is detected
• When a new Drum Cartridge or
Toner Cartridge is detected
• When the environment changes
• When 1,000 printed pages have
been produced*1
• When 200 printed pages have
been produced*2
• When the processing is com-
manded from the Control Panel
1: When 1,000 printed pages have been produced after A has been performed last.
2: When 200 printed pages have been produced after A and B have been performed last.
Processing
• Ds correction control -> LED intensity
adjustment control -> Belt surface reflec-
tion factor measurement control -> Solid
A
image toner amount control -> Laser
intensity adjustment control ->
tion control
• Solid image toner amount control ->
Laser intensity adjustment control ->
B
correction control
γ
• correction control
C
46
γ
correc-
γ