Icom IC-2400A Instruction Manual page 35

RELATED FUNCTIONS 6
(2) VFO —— MEMORY Priority watch can also watch each memory
CHANNELS channel in approx. 5 sec. consecutive intervals.
Operating frequency λα, frequencies
While receiving on
- Transmitting à watching freq.:
accepted. - Transmitting
- [PRIO] cancels not accepted.
the watch | - [PRIO] returns to
operating frequency.
1) Set the desired operating frequency in VFO
mode.
(Ώ Start memory scan.
4) Push the [PRIO] switch to start priority watch.
e "PRIO" appears. |
e Memory channels advance approx. every 5 sec.
5) When a signal is received on a priority fre-
on the frequency.
e "PRIO" flashes.
eWhen the signal disappears, priority watch
anadil m E
Changes each memory channel.
i
m
Busy
6) To cancel priority watch, push the [PRIO]
switch when the VFO frequency is displayed.
7) To watch SUB band memory channels, push
the [SUB] switch then follow steps from 1
above.
quency, priority watch pauses for approx. 15 sec.