Icom IC-2400A Instruction Manual page 29

IC-2400A/E
In call channel
Push and hold while
in call channel.
Bl 1C-2500A/E
In cali channel
Push and hold while
in call channel.
RELATED FUNCTIONS 6
1) Push the [VFO/M] switch to select VFO mode.
2) Select the frequency as a call channel.
ə Repeater or other information can be pro-
grammed. (pgs. 18, 35, 36)
3) Push the [CALL M] or [CALL S] switch to
select the call channel.
eMAIN band:
[CALL M]
SUB band : [CALL S] .
(when the SUB band is accessed)
4) Push and hold the [MW] switch until the
speaker emits 3 beep tones.
e The selected frequency is programmed into
the call channel.
5) To program a SUB band call channel, push the
[SUB] switch then follow steps from 1 above.
1) Push the [VFO/M] switch to select VFO mode.
2) Select the frequency as a call channel.
e Repeater or other information can be pro-
grammed. (pgs. 18, 35, 36)
3) Push the [CALL] switch to select the call
channel.
4) Push and hold the [MW] switch until the
speaker emits 3 beep tones.
e The selected frequency is programmed into
the call channel.
5) To program a SUB band call channel, push the
[SUB] switch then follow steps from 1 above.