Icom IC-2400A Instruction Manual page 16

EM
ΠΡ
BASIC OPERATIONS
5-1 FREQUENCY
SETTING
MAIN band SUB band
display display
(4) Set frequency.
@ Select band.
@ Turn power ON.
@ Select VFO.
The display shows that a 1 MHz
step is selected on the MAIN
band.
12
Both the MAIN and SUB band operating fre-
quencies can be set with the TUNING CONTROL
or the [UP] or [DN] switch on the microphone.
1) Push the [MAIN VOL] control to turn ON
power.
2) Push the [BAND] switch to select the desired
operating band on the MAIN band display.
eWhen "L" appears on both the MAIN and.
SUB band displays, push the [SUB] switch
once to unlock the TUNING CONTROL and
switches. (p. 13)
3) When "M" or "C" appears on the band you
wish to set the frequency, push the [VFO/M]
switch to select VFO mode.
4) Rotate the TUNING CONTROL or push the
[UP] or [DN] switch on the microphone to
change the operating frequency.
eSelect a tuning step increment in SET mode
when necessary. (p. 13)
eWhen the manual-RIT or manual-VXO is
activated (IC-2500A/E only) the TUNING
CONTROL does not change the operating
frequency. (p. 21)
5) To select 1 MHz tuning steps, push the [MHz]
switch.
e The TUNING CONTROL changes the fre-
quency in 1 MHz steps.
e The [UP] or [DN] switch on the microphone
does not change the frequency in 1 MHz steps.
ePush the [MHz] switch again to return to the
previous tuning steps.
io»)
To set the SUB band operating frequency, push
the [SUB] switch then follow steps from 1
above.