Safety symbols are used to identify any action or lack of action that can cause personal injury.
Your reading and understanding of these safety symbols is very important.
: Danger is used only when your action or lack of action will cause serious human
injury or death
: Warning is used to describe any action or lack of action where a serious injury can
WARNING
occur.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
IMPORTANT: Important is used when action or lack of action can cause equipment failure, either
immediate or over a long period of time.
WARNING
: To prevent personal injury,
• The following procedures must be performed by qualified, trained personnel who are
familiar with this equipment. Operators must read and understand all safety precautions
and operating instructions included with the device. If the operator cannot read these
instructions, operating instructions and safety precautions must be read and discussed in
the operator's native language.
• This unit is not suitable for use in explosive environments. Failure to comply may result in
damage, injury, or death.
• Safety glasses must be worn at all time by the operator and anyone within sight of the unit.
Additional personal protection equipment may include: face shield, goggles, gloves, apron,
hard hat, safety shoes, and hearing protection.
• The owner of this tool must verify that safety-related decals are installed, maintained, and
replaced if they become hard to read.
• Shut OFF the motor on the connected power unit before opening any connections in the
system.
Pump
: To prevent personal injury,
WARNING
• Do not exceed the hydraulic pressure rating noted on the pump nameplate or tamper with
the internal high pressure relief valve. Creating pressure beyond rated capacities can result
in personal injury.
• Retract the system before adding fluid to prevent overfilling the pump reservoir. An overfill
can cause personal injury due to excess reservoir pressure created when cylinders are
retracted.
© SPX FLOW, Inc.
SAFETY SYMBOLS AND DEFINITIONS
SAFETY PRECAUTIONS
3
Form No.
1000591
Rev. 2
May. 30, 2022
Need help?
Do you have a question about the PE8 Series and is the answer not in the manual?