Disconnecting The Scanner - Minolta DIMAGE SCAN ELITE 5400 Hardware Manual

Disconnecting the IEEE cable with 2000 professional, XP, and Macintosh
Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the
scanner off and then disconnect the cable.
Disconnecting the IEEE cable with Windows ME
Shut down the computer and then turn off the scanner; the cable can be disconnected. Never use
the unplug-or-eject-hardware routine, otherwise a system error may result.
Minolta History
On February 20th, 1962, John Glenn became the first American to orbit the Earth. On board
his Friendship 7 spacecraft was a Minolta Hi-matic camera to record that historic event. The
4 hour, 55 minute, and 23 second flight orbited the Earth three times at an average speed of
28,000 kph (17,500 mph).
Mr. Glenn visited our Sakai camera factory in Japan on May
24th, 1963 to plant a palm tree to celebrate the occasion. The
palm tree is still in the courtyard of the factory and stands over
eight meters tall (26ft).
The camera? It was not lost. It is on display at the
Smithsonian Institution's National Air and Space
Museum in Washington D.C. This and other objects
from John Glenn's Friendship 7 Mercury flight can
be found in galley 210, "Apollo to the Moon."

Disconnecting the scanner

Never disconnect the scanner when the indicator lamp is blinking.
Disconnecting the USB cable
Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is
not blinking. Turn the scanner off and then disconnect the cable.
19